Hyundai i10 Owner's Manual page 254

To reject the call, press the [2 SHFL]
button on the control panel.
• Alternatively, press the Call end but-
ton on the steering wheel.
NOTICE
• Depending on the mobile phone
type, call rejection may not be sup-
ported.
• Once your mobile phone is con-
nected to the system, the call
sound may be output through the
exit the vehicle if the phone is
within the connection range. To
end the connection, disconnect
the device from the system or
deactivate Bluetooth on the device.
Using options during a call
During a call, you will see the call
screen shown below. Press a button to
perform the function you want.
To switch the call to your mobile phone,
press the [1 RPT] button on the control
panel.
• Alternatively, press and hold the Call/
Answer button on the steering wheel.
To end the call, press the [2 SHFL] but-
ton on the control panel.
• Alternatively, press the Call end but-
ton on the steering wheel.
• Press the [MENU/CLOCK] button on
the control panel to access the follow-
ing a menu option:
• Microphone Volume
Volume): Adjust the microphone vol-
ume or turn off the microphone so the
other party cannot hear you.
NOTICE
• If the caller information is saved in
name and phone number will be
displayed. If the caller information
is not saved in your contacts list,
be displayed.
• You cannot switch to any other
screen, such as the audio screen
or the settings screen, during a
Bluetooth call.
• Depending on the mobile phone
type, call quality may vary. On
some phones, your voice may be
less audible to the other party.
• Depending on the mobile phone
type, the phone number may not
be displayed.
• Depending on the mobile phone
type, the call switching function
may not be supported.
05
(Outgoing
5-119