Vehicle Weight; Overloading - Hyundai i10 Owner's Manual

VEHICLE WEIGHT

Two labels on your driver's door sill
show how much weight your vehicle
was designed to carry: the Tyre and
Loading Information Label and the
Certification Label.
Before loading your vehicle, familiarize
yourself with the following terms for
determining your vehicle's weight rat-
ings, from the vehicle's specifications
and the Certification Label:
Base Kerb Weight
This is the weight of the vehicle includ-
ing a full tank of fuel and all standard
equipment. It does not include passen-
gers, cargo, or optional equipment.
Vehicle Kerb Weight
This is the weight of your new vehicle
when you picked it up from your dealer
plus any aftermarket equipment.
Cargo Weight
This figure includes all weight added to
the Base Kerb Weight, including cargo
and optional equipment.
GAW (Gross Axle Weight)
This is the total weight placed on each
axle (front and rear) - including vehicle
kerb weight and all payload.
GAWR (Gross Axle Weight Rating)
This is the maximum allowable weight
that can be carried by a single axle
(front or rear). These numbers are
shown on the Certification Label. The
total load on each axle must never
exceed its GAWR.
GVW (Gross Vehicle Weight)
This is the Base Kerb Weight plus actu-
al Cargo Weight plus passengers.
GVWR (Gross Vehicle Weight Rating)
This is the maximum allowable weight
of the fully loaded vehicle (including all
options, equipment, passengers and
cargo). The GVWR is shown on the
Certification Label located on the driv-
er's door sill.

Overloading

WARNING
The Gross Axle Weight Rating
(GAWR) and the Gross Vehicle
Weight Rating (GVWR) for your vehi-
cle are on the Certification Label
ings can cause an accident or vehi-
cle damage. You can calculate the
weight of your load by weighing the
items (and people) before putting
them in the vehicle. Be careful not to
overload your vehicle.
06
-
-
6-57