Exterior Features; Bonnet - Hyundai i10 Owner's Manual

Convenience features

EXTERIOR FEATURES

Bonnet

Opening the bonnet
1. Make sure the shift lever is in N
(Neutral, for Automated manual
transmission) or first gear or R
(Reverse, for Manual transmission)
and set the parking brake.
2. Pull the release lever to unlatch the
bonnet. The bonnet should pop up
slightly.
3. Go to the front of the vehicle, raise
the bonnet slightly, push up the sec-
ondary hood release lever (1) inside
of the bonnet centre and lift the bon-
net (2).
5-32
4. Pull out the stay-rod from the bonnet.
5. Hold the bonnet opened with the
OAC3059017R OAC3059017R
stay rod.
Closing the bonnet
1. Before closing the bonnet, check the
following:
• All filler caps in engine compart-
ment must be correctly installed.
• Gloves, rags or any other combus-
tible material must be removed
from the engine compartment.
2. Return the support rod to its clip loca-
tion for preventing it from rattling.
3. Lower the bonnet halfway (lifted
about 1 ft. (30 cm) from the closed
position) and push down to securely
lock in place. Then double check to
be sure the bonnet is secure.
If the bonnet can be raised slightly, it
is not securely locked. Open it again
OAC3053018TU OAC3053018TU
and close it with more force.
OAC3053020TU OAC3053020TU