Kenwood KRC-PS655 Instruction Manual page 35

« DIRECT/OK button
Selects the direct access tuning mode, used to input
frequencies directly. Press this button again to cancel the mode
while it is operating.
During station name input, stores the already input data in
memory and ends the input mode.
During Station name preset play mode, selects Station.
* DNPP button
Enters and cancels the Station Name Preset Play mode.
© mH button
Selects the type of characters at the time of entering the station
name:
|
Tape Mode
* T.ADV buttons ;
Press the a4 button to start play again at the beginning of the
current track.
Press the m1 button to start play at the beginning of the next
track. :
- ® REW button
Rewinds the tape.
* FF button
Fast forwards the tape.
* PROG button
Plays the reverse side of the tape. When niessed during fast
forwards and rewinds, this button stops the tape and starts
playing it.
Disc Control Mode
Number/ jettér entry buttons
Used to specify the track (disc) number used in direct track
(disc) searches.
Use to enter letters during disc name preset.
TRACK buttons
Press the TRACK— button to search inrough the tracks
backward.
Press the TRACK+ button to search through the tracks forward.
Use to move the cursor while entering. disc name.
DISC buttons
Press the DISC— button to search through the discs backward.
Press the DISC+ button to search through the discs forward.
Select numbers and symbols while entering disc name.
p11 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
OK button
During disc name input, stores the already input data in memory
and ends the input mode.
Selects disc during the disc name preset play mode.
DNPP button
Enters and cancels the Disc Name Preset Play mode.
ysybu
35