Table of Contents
Advertisement
i
Function of remote with DNPP button (See page 9)
Station Name Preset Play (SNPP}
You can search for the station name for any station if its name
has been preset using Station Name Preset.
1 Press the DNPP button on the remote.
"SNP PLAY" will be displayed once the station name preset
play mode is entered.
The names of the stations stored in the band current y listened
,
to are displayed in the following order for five seconds each:
FM1, FM2, FM3, and AM.
Each time you press the 1
button, the station display
switches in the forward direction.
Each time you press the k@< button, the station display
switches in the reverse direction.
Stations whose names have not been stored will be displayed
as frequencies.
The program service name will appear for RBDS stations.
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
"and AM displays, in that order.
Pressing the AM button switches between the display in the
reverse direction.
2 Once the name is displayed for the station you want to listen
to
Press the OK button.
Reception starts of the displayed station, and the station name
preset play mode ends.
Canceling mode during input:
Press the DNPP button.
The station name preset play mode is canceled.
&
RBDS features (See page 7) Function of the KRC-PS655/605
RBDS (Radio Broadcast Data System)
RBDS is a service used by radio stations to transmit data
outside normal radio broadcast signals.
When an RBDS station is received, you can immediately find
out what kind of data is being transmitted by looking at the
program service name, which appears in the display after the
frequency.
The 4:558 indicator turns on when an RBDS station is being
received.
When an emergency transmission (announcing disasters, etc.)
is made, the current function will be interrupted to aliow the
warning to be received under the following conditions:
during tuner reception, or when the Traffic Information
function is turned on.
15
Advertisement
Table of Contents
