Each Energy PHS3K-M1A User Manual page 46

Password:
Confirm:
Press ENT to move the cursor, press UP/DOWN to select a number for a
digit selected, and press ENT to confirm the setup after the last digit has
been set up. Press ESC to return to previous menu.
6.2.5.11 Factory Reset
This function is designed to restore factory defaults.
YES=ENT EXIT=ESC
Are You Sure ?
6.2.5.12 Adjust Total E
The total energy generated may be cleared or changed after maintenance
or translocation, and the previous data can be restored with this function.
The total energy generated can be adjusted here.
TOTAL ENERGY
5700000 KWh
6.2.5.13 Reset Total E
The total energy generated record can be cleared here, and after clearing,
the energy generation record will be zero.
YES=ENT EXIT=ESC
Are You Sure?
Press ENT to clear the energy generation history and press ESC to cancel
the previous operation.
6.2.5.14 Export On/Off
This function is to control the grid connection or disconnection of
inverters.
Inverter ON/OFF
ON
Press UP/DOWN to scroll the menu, press ENT to perform the selection,
1000
1000
44