Each Energy PHS3K-M1A User Manual page 32

NOTE:
is required to access this part! Please reset the password at the first
operation.
6.2.4.2 Fault Info.
When a fault happens, the Alarm Light will be on, and the LCD will display
a brief description of the fault. Please refer to Chapter 7 for
troubleshooting or contact after-sales department if a fault info. is
displayed.
ACHCT Device
Fault
6.2.4.3 Flash Version
The Flash version of the inverter is displayed here.
Flash Version
ES 3.0
6.2.4.4 Warning Info.
If a adverse condition presents in the inverter, the LCD will display a
warning information. The inverter will work normally with such warning
conditions. When a warning info. is displayed, please refer to Chapter 7 for
troubleshooting.
Warning
0x00000400
6.2.4.5 SW Version/Firmware Version
The software version or firmware version of the inverter is displayed and is
accessible for technicians only.
SW Version
V01.05
This operation is for maintenance personnel only. Password
Info
30