First Installation; Alarm Setting - Gogen ME 3397 Manual

FIRST INSTALLATION

• The atmospheric pressure reading will flash for 10 seconds after the first power-on. If you need
to calibrate the pressure value, adjust it by pressing buttons + / -, then press the SNOOZE/LIGHT
button to confirm. If no calibration is needed, press the SNOOZE/LIGHT button to continue.
• After setting the pressure, the Main unit will start searching for the signal of outdoor sensors, the
icon will flash. It will take about 3 minutes.
NOTE: In case the Main unit does not receive sensor data, press the CH button to rescan for sensors.
• After finding the signal of the outdoor sensors, the Main unit will start searching for the DCF77
signal (radio-controlled time), the icon
signal is received, the
NOTE: In case the Main unit does not receive the DCF77 signal, press and hold the +/RCC button to rescan for the
DCF77 signal.
The time is automatically updated every day. The DCF77 signal is received between 1:00 AM and 5:00 AM.
BASIC OPERATION
Press and hold the SET button to enter the setting mode. The setting is in order:
- Language [GE / FR / EN / DU (Dutch) / DA (Danish) / SP / IT]
- Key Tone [ON/OFF]
- Auto Dim Start time [Hour/Minute]
- Auto Dim End Time [Hour/Minute]
- DCF77 signal reception [ON/OFF]
- Time Zone
- Year > Date Format [MD/DM] > Month > Date
- Time Format [12/24H] > Hour > Minute
- Atmospheric Pressure Unit [hPa(mb)/inHg/mmHg]
- Weather [Sunny/ Partly Cloudy/Cloudy/Rainy]
- Exit
Press the + or - button to adjust the setting and press the SET button to confirm.
NOTE: Press the SET button to switch temperature units [°C/°F]. Press the - button to switch Time Format [12/24H].
AUTO DIM FUNCTION
If the function is activated, the display's brightness will automatically decrease in the set time
period. Press and hold the SNOOZE/LIGHT button to activate the function, the
Press and hold the same button to deactivate, the

ALARM SETTING

Press and hold the ALARM button to enter the setting mode. Press the + or - button to adjust the
alarm, press the ALARM button to confirm.
To activate/deactivate the alarm, press the ALARM button repeatedly. If the alarm is activated, the
icon will appear on the display.
Turn off the alarm/SNOOZE
• To cancel a sounding alarm, press any other button except the SNOOZE/LIGHT button.
• To temporarily silence a sounding alarm, press SNOOZE/LIGHT button, the
snooze period is 5 minutes. Under the Snooze mode, press any other button to cancel an alarm.
will flash. It will take about 7 minutes. If the DCF77
icon and the current time appear on the display.
icon will disappear.
EN
icon will appear.
icon will flash. The