Authentication - AKCP FreeRADIUS SP+ User Manual

Authentication

The following attributes are being sent with an Authentication package:
User-Name
This Attribute indicates the name of the user to be authenticated.
User-Password
This Attribute indicates the password of the user to be authenticated.
NAS-IP-Address
This Attribute indicates the identifying IP Address of the NAS which is requesting the
authentication of the user. AKCP's NAS-IP-Address is the SP+ unit's IP Address.
Service-Type
This Attribute indicates the type of service the user has requested, or the type of service to be
provided.
Possible value: 1 Login-User
AKCP-User-Role
This Attribute defines the privilege level of the user to be authenticated.
If this attribute is not defined, then the user's privilege level will be Viewer only.
Possible values:
0-15 - Viewer
16-31 - User
32 and above - Admin
Note: The sensorProbe+ does not interpret any attributes of an Access-Accept or Access-Reject
package.
Example authentication package
Access-Request
User-Name(1):
User-Password(2):
NAS-IP-Address(4):
Service-Type(6):
Login-IP-Host(14):
AKCP-User-Role = 32
testadmin
Encrypted
10.1.1.155
Login-User(1)
10.1.1.41
- 13 -
SP+ Radius User Manual