AKCP FreeRADIUS SP+ User Manual page 10

SP+ Radius User Manual
The system will then log you out of the web interface and connect to the Radius server for
password checking.
Now you can log into the web interface using only the Radius usernames and passwords.
However, the built-in local Admin user will always be available to use.
Also, the unit falls back to local authentication mode if a Radius server is unreachable.
All Radius users which doesn't have the privilege level attributes set, will only have Viewer level
(read-only) access to the SP+ web UI (for details, see the section How it works).
Important Note: If you happen to get logged out of the unit while setting up the Radius server
or do not want to use the Radius server to log in, you can press the reset button on the unit for 8
seconds. This disables all password checking functions. Wait about 10 seconds then you should
be able to open the web UI without any passwords.
- 10 -