Ambient Weather WEATHER WINDOW Quick Start Manual page 10

▶ After a moment, you will see your layout populated with measurements
from your default station. One tile is intentionally left blank for you to
configure. Click on the tile, select the station from your stations or your
favorites, then select the tile measurement. You can also edit the Tile
label if desired. Press the "Save" button and your dashboard preview will
refresh to include the new tile configuration. The same steps can be
followed to change the measurement displayed on any of your tiles.
▶ Press "Save" at the bottom left of the preview screen to complete
the configuration process. Your layout will be activated and will
display on your Weather Window within 1 minute. You can tap the
center of the Weather Window screen for an instant update.
You can add additional Layouts and change which one is shown on your
Weather Window by pressing the "Set as active" button beneath the desired
layout. You can also edit layouts by pressing the pencil button above the
desired layout (see Figure J).
You can switch between the dashboard screen and the forecast screen on
your Weather Window by pressing the button on the bottom right corner of
the touch screen.
When you have an alert condition, the bell icon with a red dot will appear
to the right of the date/time at the bottom of the Weather Window screen.
There are no alert details available on the Weather Window, so check the
AWN website or app to acknowledge and view the alert details. Once
acknowledged, the alert icon will disappear from the Weather Window
display the next time the screen updates.
The dashboard screen updates every minute and the forecast screen updates
every 30 minutes.
STEP 3: EDIT DISPLAY SETTINGS (OPTIONAL)
▶ Press the AWN logo at the bottom left corner of the
Weather Window screen to open the Settings menu.
▶ Press the "System Settings" button to edit the following:
▷ Screen Brightness: Set daytime brightness (0-100%)
and daylight start time ie 7:35 AM. Set nighttime
brightness (0-100%) and night start time ie 8:15 PM.
▷ Sleep Mode: Set a Sleep/Wake time daily schedule to turn the
screen off at night and turn the screen on in the morning.
▶ Press the "Network Settings" button to change
the WiFi network and password.
▶ Press the "Software Update" button to check for new
versions of the Weather Window software.
▶ Press the "About Device" button to view the
software version and MAC address
8
Figure J