Assembling The Vacuum Cleaner - Linea 2000 DOMO DO7268S Instruction Booklet

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 31
DO7268S

ASSEMBLING THE VACUUM CLEANER

Always remove the plug from the power outlet when assembling or removing any
parts.
1. Flexible hose: put the flexible hose into the air inlet at the front of the vacuum
cleaner and turn it clockwise until it clicks into place.
2. Metal tubes: Connect the 2 metal tubes. Attach the tubes to the handle. Attach the
floor brush to the tubes.
3. Accessories: crevice nozzle with small brush and small floor brush. With storage
clip, to be attached to the tube.
INSTRUCTIONS FOR USE
Before using the vacuum cleaner, you need to sufficiently unwind the cord. Then
put the plug into the power outlet. The yellow marker on the cord indicates the ideal
maximum length to unwind the cord. Never unwind the cord further than the red
marker.
1. Press the on/off button to start vacuuming.
2. Set the suction power by turning the on/off button. The handle of the tube also has
an air vent which can be opened or closed for more or less suction power.
3. Press the on/off button again to switch off the appliance.
4. To rewind the cord, remove the plug from the outlet and hold the plug in your
hand while pressing the cord rewinding button with your other hand. Hold the
plug to prevent the plug or cord from causing any damage during rewinding.
CLEANING THE DUST CONTAINER AND FILTERS
Before cleaning the vacuum cleaner or its parts, you always need to switch off and
unplug the vacuum cleaner.
Dust container:
1. Grasp the handle of the dust container and press the
silver button on top of the container. Carefully pull the
dust container upwards. The dust container will slide out
of the vacuum cleaner.
2. At the side of the dust container there is a button to open
the container.
3. Hold the dust container over a dust bin. Slide the button
down, the bottom of the dust container will open and the
dust will fall out.
4. If you want to clean the inside of the dust container more
thoroughly, you can remove the transparent part of the
dust container by turning it counterclockwise to unlock.
36

Advertisement

Table of Contents
loading

Table of Contents