Boiler Fixing - Riello 40 G3 Installation, Use And Maintenance Instructions

BOILER FIXING

THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL
STANDARDS.
It is necessary that the insulating gasket (9, Fig. 1) is placed between the boiler door and the burner
flange. This insulating gasket has six holes, which, if necessary, can be modified as shown on the
drawing on the right.
Verify that the installed burner is lightly leaned towards
the button. (See figure 2).
The burner is designed to
allow entry of the flexible oil-
lines on either side of the
burner.
2664
D5242
Fig. 2
D5218
3
GB
BURNER FIXING
S7386