Saxby Lighting 108672 Instruction Manual

Wiring
Having correctly identified the wiring from your existing light fitting, pull the mains wire through the hole and connect to an
approved outdoor rated terminal block(not supplied) in the following way:
SUPPLY
NEUTRAL
EARTH
SWITCHED LIVE
Technical data
Supply
220-240 V~, 50 Hz
Voltage:
108672: 10W LED module (SMD), 4000K
Bulb
Type: 108673: 20W LED module (SMD), 4000K
This product contains a light source of energy efficiency class F.
Non-replaceable light source
Conformity with all relevant UKCA Directive requirements.
Conformity with all relevant EC Directive requirements.
This is a Class 1 product and must be earthed.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
Caution! Risk of electric shock!
This product is rated at IP65.
65
IP
This product is rated at IK08.
08
IK
Care and Safety
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
This LED's are protected by the glass shade. The shade part must be replaced immediately should it
become cracked or damaged. This fitting must not be used without the glass shade in place.
Replace Cracked Shade
For further information, please visit https://www.lighting-info.co.uk/108672
V2 20/11/2023
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
LIGHT FITTING
Check that...
BLUE (N)
You have correctly identified the
wires.
GREEN / YELLOW
The connections are tight.
No loose strands have been left
BROWN (L)
out of the connection block.
108674: 30W LED module (SMD), 4000K
108675: 50W LED module (SMD), 4000K
Non-replaceable control gear
Instruction manual
Guard PIR Override Floodlight
108672, 108673, 108674, 108675
www.saxbylighting.com