Table of Contents
Advertisement
Quick Links
Fitting/replacing bulbs
•
system contains non-replaceable parts and
This
cannot be serviced. If damage occurs the part should
be scrapped.
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before cleaning.
The LED's are protected by a lens. This part must be replaced immediately should the lens become
cracked or damaged. This fitting must not be used without the lens in place.
UK Manufacturer:
EU Manufacturer:
BH17 7BY
Brilliant AG, 27442, Germany
www.saxbylighting.com
Instruction leaflet
Laryn PIR Flood Light
5278J, 7172J
27012021
Saxby Lighting Ltd. BH23 3PE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Saxby Lighting Laryn 5278J
Summary of Contents for Saxby Lighting Laryn 5278J
- Page 1 The LED's are protected by a lens. This part must be replaced immediately should the lens become cracked or damaged. This fitting must not be used without the lens in place. UK Manufacturer: EU Manufacturer: BH17 7BY Brilliant AG, 27442, Germany 27012021 www.saxbylighting.com Saxby Lighting Ltd. BH23 3PE...
- Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. • Decide on the optimum location for the product. for brick or cavity walls. Ensure the wall is capable of holding the weight of • Fit the batteries, ensuring the Battery Care warnings the product. on the previous page are heeded. Warning • Place the floodlight in an upright position. • Push the button on top of the wall back down with • Remove the screw from the base of the product and one hand and push the product onto the wall back. It The unit cannot be dimmed. Battery Care:- set aside for refitting later. will click in place. Refit the screw to the base of the product to secure in place. This system contains non-replaceable parts and - Do not recharge non-rechargeable batteries. • To detach the wall back from the product, press cannot be serviced. If damage occurs the part should down the button (on top of the battery box) with one • Switch on the product using the toggle switch and - Do not mix old and new batteries or batteries of be scrapped. hand and pull the ribbon tab with the other hand. adjust the PIR sensor as detailed below. Please note different types/brands. the sensor rotates for easy access to the controls. Waste electrical products should not be disposed of • Using the wall back as a template, mark and drill the - Do not use rechargeable batteries. Always remove...
Need help?
Do you have a question about the Laryn 5278J and is the answer not in the manual?
Questions and answers