Relay Play - Kenwood X-7WX Instruction Manual

To listen to cassette tape
gw Set TIMER STANDBY switch on a cassette deck to OFF and turn ON the
power.
How to play back tapes (Same for A
and B deck)
@ Press EJECT key.
Set the desired cassette tape with its running side down
into the cassette holder and close it.
@ Adjust DOLBY NR to the contents of the cassette tape.
Tapes recorded with DOLBY NR should be set to B or C,
otherwise set to OFF to listen.
©
Set DIRECTION key as desired.
©
Press PLAY key (>), REVERSE PLAY key (<1) or TAPE
on the amplifier.
To operate with the amplifier, press TAPE A key for
playback on A deck and press TAPE B for the playback on
B deck.
© Control the volume by VOLUME contro! on the
amplifier.
Relay play
3 @ 3
This device can repeat the playback. of cassette tapes in both
A and B decks alternately.
6 x-7wx(u)
@ Set cassette tapes in both A and B decks.
@ Set DIRECTION switch to normal mode (=
mode (=).
) or reverse
@ Press PLAY key (>) or REVERSE PLAY (<) on A or B
deck.
When DIRECTION switch is set to normal mode ( ==) at
the end of playback the cassette tape rewinds, then the
other deck starts playing. When DIRECTION switch is set
to reverse mode (=>), at the end of reverse playback, the
other deck starts playing.
Relay play notes: ———________-_____-
1. Place a cassette tape in A and B decks and press a PLAY
key (>) or REVERSE PLAY key (<1). This automatically sets
the switch to relay play mode.
2. When the direction mode switch is set to" €) " position
relay play is not performed.
3. When setting only one deck to play mode, do not set a
tape in other deck.
4. Rewind the tapes in both decks. When relay play starts
at the end of the tape in both A and B decks, it will not
operate correctly.
5. Avoid using exceedingly short tape which finishes play-
ing time while the other tape is rewinding. Malfunction
will result.
Endless play in A or B deck
@ Set DIRECTION switch to endless mode (>).
@ Press PLAY or REVERSE PLAY keys on A or B deck.
@® Both sides of the tape are on endless play.