Relay Playback (Ct-403/Kxf-W3030 Only) - Kenwood KXF-W1030 Instruction Manual

To stop playback
(dB) — —5 0 +3 +6 (dB)
÷ When taking out the tape, press the area marked PUSH/
OPEN 0 after the tape transport has stopped completely.
Relay playback
This function plays back the tapes in both decks A and B
continuously and repeatedly.
1
Load cassette tapes in both decks.
2
Determine the playback conditions.
1 Select the Dolby NR mode.
(dB) — —5 0 +3 +6 (dB)
2 Select the playback mode.
(dB) — —5 0 +3 +6 (dB)
3
Start playback.
(dB) — —5 0 +3 +6 (dB)
To Stop relay playback
Press stop (7) key of the deck that is
playing.
—
(dB) —5 0 +3 +6 (dB)
7
(CT-403/KXF-W3030 only)
0
DOLBY NR
REV.MODE
@ 7 #
7
Listening to cassette tapes
Fast Forward and Rewind
1 Stop playback.
(dB) — —5 0 +3 +6 (dB)
2 Press the 1 key or ¡ key.
(dB) — —5 0 +3 +6 (dB)
1: Fast tape winding in the | direction
¡: Fast tape winding in the \ direction
÷ Press the stop (7) key to stop fast tape winding.
÷ Set to OFF the Dolby NR key when playing a tape recorded with-
out using Dolby NR.
1 Dolby NR on
2 Dolby NR off
÷ Each press switches the indication.
1 "[" :Relay playback of two sides of tapes in decks A and B is
repeated.
2 """ :Relay playback is not available with this setting.
3 """ :Relay playback of one side only for deck A and deck B,
and then playback stops.
÷ Tapes are played in the directions indicated by their respective indica-
tors on the display.
÷ The playback starts with the deck the play key of which is pressed.
7
1 ¡
Dolby NR on Dolby NR off
DOLBY NR DOLBY NR
Goes off
Lit
11