Download Print this page
Retrax EQ Quick Start Manual
Hide thumbs Also See for EQ:

Advertisement

Quick Links

PLEASE READ INSTRUCTION CAREFULLY
BEFORE STARTING THE INSTALLATION.
1
Physically install the Retrax EQ cover on the truck
and make all necessary wired connections.
Refer to the next page for full EQ installation instructions.
3
Open the installer app and follow prompts
CABIN
Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023
module.
the
iOS
Android
QUICK START
INSTALLATION SHEET
Any damaged or missing parts?
Parts will be shipped to you directly.
Call 800-206-4070 Mon - Fri, 8:00 a.m. - 5:00 p.m. CST
or email retrax@retrax.com
2
Physically install
the cabin module
inside the truck.
4
In the installer app follow
COVER
module.
5
Pair accessory controls
such as keypad and
phone (optional).
Refer to
the instructions shipped with
accessories.
1
2
3
4
5
6
7
8
9
0
4000-148 Rev. 9-19-23

Advertisement

loading
Need help?

Need help?

Do you have a question about the EQ and is the answer not in the manual?

Questions and answers

Summary of Contents for Retrax EQ

  • Page 1 Pair accessory controls CABIN module. such as keypad and COVER module. phone (optional). Refer to the instructions shipped with accessories. Android 4000-148 Rev. 9-19-23 Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023...
  • Page 2: Installation Sheet

    Bit extension for Drill/Impact driver  RealTruck EQ user apps to complete Step drill bit or 11/16” Drill bit (Optional)  this installation. 4000-148 Rev. 9-19-23 Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023...
  • Page 3 Passenger Side Driver Side Tighten the bolts to: FIRST Tighten the 35 in-lbs bolts to: 4,0 N-m 15 in-lbs 1,7 N-m Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023 4000-148 Rev. 9-19-23...
  • Page 4 Route the main wiring harness (E) along the frame rails located on the underside. Maintain a wiring route that keeps the wire as high as possible to prevent damage when driving. Keep the wires away from moving parts and exhaust. 4000-148 Rev. 9-19-23 Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023...
  • Page 5 When placing on the truck bed with two people, place the canister portion of the cover (C) near the bulkhead. The front seal of the cover should lay forward towards the cab and lay flat. Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023 4000-148 Rev. 9-19-23...
  • Page 6 Re-tighten the screws to fully engage the lock washers. Do this also on the driver side rail (B). Always make sure that two sets of teeth are fully engaged. Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023 4000-148 Rev. 9-19-23...
  • Page 7: Rear Section

    If the rails measure to be too far apart, turn the screws counter clockwise. turn the screws clockwise. Adjustment Truck bed screw rail REAR SECTION Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023 4000-148 Rev. 9-19-23...
  • Page 8 Insert the seal into the T-slot on each rail from the top. Scan this QR code for a link to your specific vehicle’s cabin module installation instructions. Android 4000-148 Rev. 9-19-23 Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023...
  • Page 9: Troubleshooting

    Cycle the cover to the fully open or fully closed position to ensure proper cover engagement. 4000-148 Rev. 9-19-23 Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023...
  • Page 10 3. As the carriages reach the tail panel of the cover, they will engage and the calibration process will be complete. STEP 1 STEP 2 Tailgate 4000-148 Rev. 9-19-23 Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023...
  • Page 11 Clean with mild automotive soap and water only. Do NOT use any strong chemicals or cleaners. Do NOT wax your Retrax cover. The weather-stripping on your cover may absorb soapy residue from a car wash, so we recommend wiping down the inside of your rails from time to time.
  • Page 12 The serial number is 8 - 14 digits and may or may not include a letter in it. 4000-148 Rev. 9-19-23 Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax Holdings, LLC, 2023...