MSI 648F Neo Manual page 57

MS-6585 ATX Mainboard
USB HDD
USB RMD-FDD
USB RMD-HDD
Disabled
MSI Reminds You...
Available settings for "1st/2nd/3rd Boot Device" vary depend-
ing on the bootable devices you have installed. For example, if
you did not install a floppy drive, the setting "Floppy" does not
show up.
Boot Other Devices
Setting the option to Yes allows the system to try to boot from other
devices if the system fails to boot from the 1st/2nd/3rd boot device.
Hard Disk S.M.A.R.T.
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis &
Reporting Technology) capability for the hard disks. S.M.A.R.T is a utility that
monitors your disk status to predict hard disk failure. This gives you an
opportunity to move data from a hard disk that is going to fail to a safe place
before the hard disk becomes offline. Settings: Enabled, Disabled.
Boot Up Num-Lock LED
This item is to set the Num Lock status when the system is powered on. Setting
to On will turn on the Num Lock key when the system is powered on. Setting to
Off will allow end users to use the arrow keys on the numeric keypad. Setting
options: On, Off.
Halt On Keyboard Error
This item is to determine whether the system will stop if an keyboard error is
detected. Settings: Enabled, Disabled.
Swap Floopy
Setting to Enabled will swap floppy drives A: and B:.
3-10
The system will boot from the USB-interface HDD.
The system will boot from any USB-interface ARMD
device, such as LS-120 or ZIP drive, that functions as a
floppy drive.
The system will boot from USB-interface ARMD
device, such as MO or ZIP drive, that functions as hard
disk drive.
Disable this sequence.