Advertisement
Quick Links
Quick Start
Cloud-Ready SSR1500
IN THIS GUIDE
Step 1: Begin | 1
Step 2: Up and Running | 5
Step 3: Keep Going | 8
Step 1: Begin
IN THIS SECTION
Meet the Cloud-Ready SSR1500 | 2
Claim Your Appliance | 2
In this guide, we provide a simple, three-step path, to quickly get the Juniper Networks® SSR1500 appliance up and
running on Juniper Mist
™
using your computer. Once on-board, we'll walk you through the steps to create a basic configuration. You'll need your
Juniper Mist WAN Assurance subscription and your login credentials for the Juniper Mist portal.
NOTE: Before you begin, you must set up your organization and sites, and activate your subscriptions. For more
information, see
Quick Start:
cloud. You can on-board a single device using your mobile phone, or one or more devices
Mist.
Advertisement
Related Manuals for Juniper SSR1500
Summary of Contents for Juniper SSR1500
- Page 1 IN THIS SECTION Meet the Cloud-Ready SSR1500 | 2 Claim Your Appliance | 2 In this guide, we provide a simple, three-step path, to quickly get the Juniper Networks® SSR1500 appliance up and running on Juniper Mist ™ cloud. You can on-board a single device using your mobile phone, or one or more devices using your computer.
- Page 2 Meet the Cloud-Ready SSR1500 The SSR1500 is a 1 U fixed configuration appliance that's ideal for for extra large data center or campus deployments. Powered by the Juniper® Session Smart Router (SSR) software, the SSR1500 provides secure and resilient WAN connectivity.
- Page 3 5. On the Organization screen, tap Device Inventory → Routers → Unassigned. Review the MAC address. Onboarding Complete! Fantastic, the SSR1500 is in your inventory! To provision the SSR1500, see "Step 2: Up and Running" on page Enter the Mist Claim Code Claiming multiple devices—When you purchase multiple devices, we provide you with an activation code along with...
- Page 4 3. Click Claim WAN Edges in the upper right portion of the inventory screen. 4. Enter the SSR1500 Activation code or claim code and click Add. 5. Clear the Assign claimed WAN Edges to site check box to place the SSR1500 in the inventory. The SSR1500 is assigned to a site later, see "Assign the SSR1500 to a Site"...
-
Page 5: Table Of Contents
Cloud The SSR1500 is onboarded to the . To provision the SSR1500 with ZTP, log in to your Mist portal Assign the Template to a Site | 6 and begin the WAN configuration. Configuring your SSR Assign the SSR1500 to a Site | 6 device is made simple through the use of the SSR WAN Edge Templates. -
Page 6: Assign The Template To A Site
Great work! All that remains is to associate the SSR1500 with a site. Assign the SSR1500 to a Site After the SSR1500 is onboarded to the Mist cloud, you'll need to assign it to a site so you can begin to manage the configuration and gather data in Mist cloud. -
Page 7: Install The Ssr1500 In A Rack
3. Power on the SSR1500. Great job! Your SSR1500 is now connected to the Mist cloud! In just a few minutes, Mist will send the template-driven configuration down to your device. Once the configuration has been applied, it will begin forwarding sessions from LAN to WAN as described by your policy. - Page 8 IN THIS SECTION SUMMARY What's Next? | 8 Congratulations! Now that you've done the initial configuration, your SSR1500 is ready to use. Here are some General Information | 8 things you can do next: Learn with Videos | 9 What's Next?
- Page 9 Juniper Learning Portal Juniper Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners.