Programmed Edit Recording - Aiwa NSX-DS50 Operating Instructions Manual

Programmed Edit Recording
As you program the CD tracks to record, Programmed Edit
Recording displays the remaining recording time for each side
of the tape, so you can easily select a set of desired tracks
within the length of your fape.
7 Insert the recording tape in DECK 2.
2 Press CD to select the CD function and load the
disc.
3 Press CD EDIT/CHECK twice on the remote
control.
The "PRGM" and "EDIT" indicators light up and
"PRGMC-OD" appears on the display.
4 Press the numbered buttons on the remote
control to enter the length of the recording tape.
10 to 99 minutes can be specified.
© <4, > oF MULTI JOG can also be used to specify
tape length.
5 Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press the numbered buttons on the remote
control to select the first track to be recorded on
side A.
-To select the 25th track, press +10, +10 and 5.
-To select the 10th track, press +10 and 0.
6 Repeat step 5 to select the rest of the tracks for
side A.
The remaining recording time of side A is displayed. You
cannot select a track with a longer playing time.
7 Press CD EDIT/CHECK on the remote control to
switch to side B and select the tracks for the side.
18
8 Press CD EDIT/CHECK on the remote control to
switch back to side A and press @REC/REC
MUTE to start recording on side A.
The tape is rewound to the beginning of side A and
recording starts.
Go to the next step when recording on side A finishes.
9 Press CD EDIT/CHECK on the remote control to
switch to side B, turn over the tape, and press
@REC/REC MUTE to start recording on side B.
© You cannot program more than 30 tracks. "FULL" is
displayed.
e You cannot program a track with a track number larger than
30.
Recording cannot start from a point halfway in the tape.
To stop recording
Press Ml. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, press CD EDIT/CHECK on the remote
control to select side A or B.
2 Press <@<@ or BP repeatedly. The track number and
program number are displayed in succession.
To change the program of each side
Press CD EDIT/CHECK on the remote control to select side A
orB, and press MICLEAR to clear the program for the selected
side. Then, select tracks again.
To clear the edit program
Press MBCLEAR twice so that "EDIT" disappears from the
display.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.