Ironing Without Steam - Silvercrest 387993 2104 Operating Instructions Manual

Ironing without steam

CAUTION! PROPERTY DAMAGE!
► Check the care instructions on the labels in garments to see if they are suit-
able for being ironed, and at which temperature setting.
► If the clothing care instructions forbid ironing (
be ironed. Ignoring this warning could lead to permanent damage to the
clothing item.
NOTE
Always set the temperature control 2 to the lowest level (min) before switching
the appliance on. The symbols on the temperature control 2 correspond to
the following settings:
1) Press the On/Off button t to turn the appliance on. The indicator lamp
integrated in the On/Off button t lights up and the "max" steam indicator
lamp w flashes.
2) Rotate the temperature control 2 to set the required ironing temperature.
3) The heat-up indicator lamp 3 lights up during heating. As soon as the heat-
up indicator lamp 3 goes out, the set temperature has been reached and
you can start ironing.
4) Put the iron down on the base station placement area 5 after ironing. Set
the temperature control 2 to "min".
5) Press the On/Off button t to turn the appliance off. The indicator lamp
integrated in the On/Off button t and the "max" steam indicator lamp w
go out.
6) Pull out the plug from the mains socket.
SDBS 2400 A1
Symbol
min -
( - max)
), the garment must not
Temperature
Material
Synthetics
Silk
Wool 100 - 160 °C
Cotton/linen 140 - 210 °C
(approx.)
70 - 120 °C
70 - 120 °C
GB │ IE
11
│
■