Troubleshooting - Samsung SMT-W5100 Instruction Manual

Hide thumbs Also See for SMT-W5100:
Table of Contents

Advertisement

TROUBLESHOOTING

Possible problems and troubleshooting steps for your phone are described below.
Check the troubleshooting steps before contacting your Authorized Samsung Reseller.
General
Trouble
The bell does not ring or the ring
sound is too small.
The battery is not empty but the
phone does not turn on.
Voices echo during a call.
Calls are disconnected frequently.
The phone operates abnormally or
does not operate at all.
124
_ © SAMSUNG Electronics Co., Ltd.
Solution
- Check if the phone is set to etiquette mode.
- Adjust the volume at [MENU]
[1. Incoming calls]
[3. Ring Volume].
- Take the battery out and put it in again, and turn the
phone on.
- Take the battery out, clean the charging phones of the
battery. Then put the battery back in, and turn the phone on.
- Press the [Volume] button and adjust the volume
- Move to another area.
Move to another area since the frequency is unstable.
Take the battery out and insert it again, and turn the phone on
again.
[4. Volume/Ring]

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents