Model Without The Tv Tuner; I.link (Ieee1394) - Toshiba Qosmio F10-124 User Manual

1. Insert one end of the S-Video-in cable into the S-Video-in port of your
computer.
2. Insert the other end of the S-Video-in cable into the output port of the
analog device you wish to connect. To hear sounds, use a video cable
to connect the sound terminals of the audio device and your computer
(red: sound, right channel, white: sound, left channel).
After connecting an analog video camera or a video deck to your computer,
run WinDVR. WinDVR is started by selecting Start -> All Programs ->
InterVideo WinDVR.

Model without the TV Tuner

The model without the TV Tuner only supports the Monitor Input feature.
This feature allows you to display video from a device such as an analog
video camera or game machine on the LCD of your computer while
Windows is running by connecting such device to the S-Video-in port of
your computer. Refer to the section Switching video Input in Chapter 8,
Using the Remote Controller, AV Buttons and QosmioPlayer, for
information on how to configure this feature.

i.LINK (IEEE1394)

i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as
I
Digital video cameras
I
Hard disk drives
I
MO drives
I
CD-RW drives
i.LINK uses a four-pin connector, which does not carry electric current.
External devices will need their own power supply.
User's Manual
Connecting the S-Video-in port
Optional Devices
S-Video-in port
9-19