Remote Controller - Toshiba Qosmio F10-124 User Manual

Remote Controller

Type of battery that can be used for the Remote Controller
When the batteries shipped with the Remote Controller has discharged
replace it with a single CR2025 (or equivalent) Ni-MH battery. Other types
or battery cannot be used.
If you use the product for the first time, you may see an insulating seal on
the battery terminal. If this is the case, remove it to begin using the remote
control.
Replacing the batteries
1. Remove the battery holder by inserting a tool with a pointed tip such as
a pen into the eject hole located on the rear panel of the Remote
Controller.
2. Remove the battery from the battery holder
User's Manual
Using the Remote Controller, AV Buttons and QosmioPlayer
Removing the insulating tape
Opening the battery holder
Insulating tape
Eject hole
Battery holder
8-19