Table of Contents
Advertisement
If the No Power Savings is selected, the audio controller always runs.
If you want to a more effect for the power management, you can select
another mode, the High Power Savings which can save the power than
the Normal Power Savings. To select it, follow the steps below.
1. Click the Power Management tab.
2. Select the High Power Savings in the Power Mode pull-down list.
3. Input a time in Power Save Delay (Seconds).
If the High Power Saving is selected, you need to play an audio file once
before you use a microphone or play an audio CD by the analog CD audio.
TOSHIBA Audio Effect
TOSHIBA Audio Effect includes TOSHIBA Virtual Sound. The purpose of
TOSHIBA Virtual Sound is to provide enhancements and more realism to
the music and sound that you play on the computer. It uses the SRS WOW
XT and SRS TruSurround XT technologies that are provided by SRS Labs,
Inc. For more information on using the TOSHIBA Virtual Sound, refer to its
help.
To launch the help of TOSHIBA Virtual Sound, click Start, point to All
Programs, point to TOSHIBA, point to Utilities and click Virtual Sound
Help.
Writing CD/DVDs on DVD Super Multi drive
You can use the DVD Super Multi drive to write data to either CD-R/RW or
DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are
supplied on CD-ROM: RecordNow!, licensed by Sonic Solutions.
InterVideo WinDVD Creator Platinum, which is a product of InterVideo, Inc.
Important message
Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM
disc, read and follow all setup and operating instructions in this section. If
you fail to do so, the DVD Super Multi drive may not function properly, and
you may fail to write or rewrite, lose data or incur other damage.
Disclaimer
TOSHIBA does not bear responsibility for the following:
I
Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may
be caused by writing or rewriting with this product.
User's Manual
Operating Basics
4-9
- Quick Links:
- Hardware
Hide quick links:
Advertisement
Table of Contents
