Monitor-in
Set up Terminal Shape before connecting with Monitor-in port. Refer to the
section
AV Buttons and QosmioPlayer, for details.
Models with built-in TV Tuner
The Monitor-in allows you to connect the following devices to display video
on the built-in LCD.
I
Analog video camera
I
Analog video deck/recorder
I
Home TV game machine
I
Mobile phone with TV output
Switching between devices
Make sure to power off your computer before performing the following
steps.
1. Insert the plug of the Monitor-in cable into the Monitor-in port of your
computer.
2. Insert the corresponding plugs of the output cable of the device you
wish to use into the sound input terminals (red: sound, right channel,
white: sound, left channel) and the video input (yellow: composite) of
the Monitor-in cable.
3. Insert the plugs at the other end of the output cable of the device you
wish to use into the output terminals of that device.
User's Manual
Switching video Input
Connecting the Monitor-in port
Sound right input (red)
white
red
in Chapter 8, Using the Remote Controller,
yellow
Connecting the cable
Optional Devices
Monitor-in port
Sound left input (white)
Video input (yellow)
9-16