Table of Contents
Advertisement
2.3. You haven't yet created a HomePlug network: initial
installation of Hercules ePlug 200 Nano PT Duo
The HomePlug AV standard of Hercules ePlug 200 adapters is not compatible with the
Homeplug 1.0 standard of Hercules ePlug 85 adapters and HomePlug 14 Mbits/s
adapters, but these two standards can coexist side-by-side. In effect, if you have already
installed a HomePlug network in the HomePlug 1.0 standard (for example, with Hercules
ePlug 85 adapters), you cannot add Hercules ePlug 200 adapters to that network. However,
you are perfectly able to install a second network in your home composed of Hercules
ePlug 200 adapters and HomePlug AV compatible devices.
To install a HomePlug network:
10/74 – User Manual
1. Connect the Ethernet cable to the Ethernet plug
on your first adapter.
2. Plug the adapter into an electrical outlet located
near the device to be connected to the network.
On the Hercules ePlug 200 Nano PT: if you
wish, plug another device into the additional
electrical outlet (powerstrip, modem,
printer...).
Hercules ePlug 200 Nano PT
Advertisement
Table of Contents
