Windows Xp: Using The Network Setup Wizard In An Ad Hoc Network - Hercules ePlug 200 Nano PT Manual

Hercules ePlug 200 Nano PT
The procedures described in this chapter are specific to Windows XP. For all other questions
related to sharing folders, a printer or an Internet connection, or on using Windows, please
refer to the Windows online help utility.
4.5.2. Windows XP: Using the Network Setup Wizard in an Ad
hoc network
Proceed as follows for each computer:
17. Click Finish to exit the Wizard.
Once the procedure is finished, Windows XP may
prompt you to restart your computer.
1. Click Start/All Programs/Accessories/
Communications/ Network Setup Wizard.
The Network Setup Wizard is launched.
2. Click Next twice.
The window opposite may appear if The Wizard
found disconnected network hardware.
3. If your Ethernet network connection is not
displayed in the list, tick the Ignore
disconnected network hardware box, then
click Next. Otherwise, exit the Wizard by
clicking Cancel and establish the connection
from your network device to your router (for
more information, please refer to your router's
manual).
User Manual – 63/74