You Have Already Created A Homeplug Network: Adding A New Adapter To Your Network - Hercules ePlug 200 Nano PT Manual

Hercules ePlug 200 Nano PT
2.4. You have already created a HomePlug network: adding a
new adapter to your network
Let's take an example of a home in which you have already installed a HomePlug network composed of
HomePlug adapters in the AV standard (Hercules ePlug 200 Nano PT, for example). You now wish to install
one or more new Hercules ePlug 200 Nano PT adapters in order to expand your network and be able to
connect new devices (printer, modem, router, game console...).
Ethernet connection and electrical connection of your new Hercules ePlug 200 adapter
1. Connect the Ethernet cable to the Ethernet plug
on your new adapter.
2. Plug the new adapter into an electrical outlet
located near the device to be connected to the
network.
In order to optimize data transfer on the PLC
network, it is preferable not to plug your
adapter directly into a powerstrip.
On the Hercules ePlug 200 Nano PT: if you
wish, plug another device into the additional
electrical outlet (powerstrip, modem,
printer...).
User Manual – 13/74