You Haven't Yet Created A Homeplug Network: Initial Installation Of Hercules Eplug 500 Nano Duo - Hercules ePlug 500 Nano Manual

Hercules ePlug 500 Nano
2.3. You haven't yet created a HomePlug network: initial
installation of Hercules ePlug 500 Nano Duo
The HomePlug AV standard of Hercules ePlug 500 adapters is not compatible with the
Homeplug 1.0 standard of Hercules ePlug 85 adapters and HomePlug 14 Mbits/s
adapters, but these two standards can coexist side-by-side. In effect, if you have already
installed a HomePlug network in the HomePlug 1.0 standard (for example, with Hercules
ePlug 85 adapters), you cannot add Hercules ePlug 500 adapters to that network. However,
you are perfectly able to install a second network in your home composed of Hercules ePlug
500 adapters and HomePlug AV compatible devices.
To install a HomePlug network:
10/73 – User Manual
1. Connect the Ethernet cable to the Ethernet plug
on your first adapter.
2. Plug the adapter into an electrical outlet located
near the device to be connected to the network.