Minimum System Requirements; Box Contents; Leds Overview - Hercules ePlug 200 Nano PT Manual

Hercules ePlug 200 Nano PT

1.3. Minimum system requirements

To connect a device to your Hercules ePlug 200 Nano PT adapter:
An Ethernet type network interface must be available on each device to be connected (computer, game

console, modem, router, TV decoder, etc.)
To access the Internet with the Hercules ePlug 200 Nano PT adapter:
Active Internet line

Internet Explorer 6.0, Netscape Navigator 4.7 or Mozilla Firefox 1.0 or higher

ADSL Ethernet modem, cable modem, Internet "Box" (Livebox


1.4. Box contents

Please verify that the following elements are present in the box:
Hercules ePlug 200 Nano PT Duo: 2 adapters

Quick Start Guide in English

Ethernet cable (1 per adapter)

The "Hercules ePlug Station" network configuration and supervision software is available for
download at http://ts.hercules.com.

1.5. LEDs overview

: HomePlug connection status LED:
- Green: very good connection (transfer rates greater than
60 Mbits/s)
- Orange: fairly good connection (transfer rates between 60 and
40 Mbits/s)
- Red: mediocre connection (transfer rates less than 40 Mbits/s)
: Power LED: flashes during traffic
: Ethernet connection LED:
- lit up when the Ethernet cable is connected
- flashes during data transfer
, Freebox , Neufbox ...)
® ® ®
User Manual – 5/74