2.2.3. Connecting an Internet "box" to a Digital Terrestrial
Television decoder in a HomePlug network
2.3. You haven't yet created a HomePlug network: initial
installation of Hercules ePlug 200 Duo
The HomePlug AV standard of Hercules ePlug 200 adapters is not compatible with the
Homeplug 1.0 standard of Hercules ePlug 85 adapters and HomePlug 14 Mbits/s adapters, but these
two standards can coexist side-by-side. In effect, if you have already installed a HomePlug network in
the HomePlug 1.0 standard (for example, with Hercules ePlug 85 adapters), you cannot add Hercules
ePlug 200 adapters to that network. However, you are perfectly able to install a second network in your
home composed of Hercules ePlug 200 adapters and HomePlug AV compatible devices.
To install a HomePlug network:
1. Connect the Ethernet cable to the Ethernet plug
on your first adapter.
Hercules ePlug 200
User Manual – 7/42