Preventative Maintenance Schedule - DV Systems IS Series Installation, Maintenance, And Service Data

Hide thumbs

Table of Contents

Noted below and to follow are general maintenance guidelines which must be followed and documented, this in

accordance with the DV Warranty. It is based on an approximate Compressor usage of 40 hours per week. If your

particular application varies from this, please adjust accordingly.

When servicing the Air Compressor, shut off all power to the Unit, and drain the Tank

of air pressure. Always replace the Beltguard after adjusting the Belts or Pulleys.

Drain moisture from Air Receiver

Check oil level and top up as required

Replace Air Filter

Replace Oil (mineral)

Check condition/alignment of Belts/Pulley

Check Safety Valves

Check that Unit unloads when shutting down

Clean and/or blow dust/dirt off Unit

Replace Oil (synthetic)

Inspect Check Valve

Inspect Pressure Gauge

Notes:

1. Air Filters are available separately or in the Maintenance Kit. Consult the Pump breakdown.

2. Mineral Oil is available separately or in the Maintenance Kit. Consult the Pump breakdown.

3. Belts and Pulleys are available through your local DV Systems Distributor.

4. 'OJ2000-K1' Synthetic Oil is available in 1 US Gallon Jugs.