D-Link Go-RT-N300 User Manual page 13

Section 2 - Installation
5. Plug the power adapter into your router and connect to an available power outlet or surge protector. If the Power LED
does not light up, press the Power button on the back of the router.
If connecting wirelessly, open your wireless utility on your computer and connect to the router. The Wi-Fi network (SSID)
is GO-RT-N300 with no password.
6. After the router has powered up, verify that the Power and Internet LEDs are both lit. Proceed with router configuration.
D-Link GO-RT-N300 User Manual
GO-RT-N300
4 3 LAN 2 1 INTERNET POWER
RESET
Modem
Computer
12V 1A
WPS
9