Operation; Product View And Parts Identification; Know Your Snow Thrower - Craftsman 536.881851 Operator's Manual

KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER. Compare the illustrations with your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Choke
Control
Primer
Button
Auger
Drive Lever
(right hand)
Drive Lever
(left hand)
Gas Speed Crank
Cap Shifter j Assembly
Lever
Chute
Deflector
Discharge
Chute
Safety
Key
Recoil
Starter
Handle
Stop
Switch
Electric
Start
Button
Height
Adiust
Skid ,'------
Shear Pin
Scraper Bar Figure 9
Auger Drive Lever - Startsand stops
the auger and impeller(snow gathering
and throwing)
Traction Drive Lever - Propelsthe
snowthrower forwardand in reverse.
Speed Shifter Lever - Selects the
speed of the snow thrower (6 speeds for-
ward and 2 speeds reverse).
Crank Assembly - Changes the direc-
tion of snow throwing through the dis-
charge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute - Changes the height
and direction the snow is thrown.
Height Adjust Skid - Adjusts the ground
clearance of the auger housing.
11
Safety Key - Must push in to start the
engine.
Recoil Starter Handle - Starts the en-
gine manually.
Choke Control - Used to start a cold
engine.
Primer Button - Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Electric Start Button - (if so equipped)
Used to start the engine using the 120 V
electric starter.
Shear Pin - Shear pinsare designedto
break (to protectthe machine)if an ob-
iect becomes lodgedin the auger hous-
ing.
Toolbox - Spare shear pinsand spacers
are locatedin toolbox.