Table of Contents
Advertisement
Visit Radioddity.com For Downloads And Help
4. Use the
and
keys to pick the desired color
5. Press
to confirm and save
MENU
6. Press
to exit the menu.
EXIT
To change the duration of the backlight stays on for your LCD, follow these steps:
Procedure 9.2. Setting backlight time-out
1. Press the
key to enter the menu.
MENU
2. Enter
on your numeric keypad to come to backlight time out.
3. Press
key to select.
MENU
4. Use the
and
keys to pick the desired color
5. Press
to confirm and save
MENU
6. Press
to exit the menu.
EXIT
For details see the section called "29 WT-LED- Display backlight color, Standby" and
onward in Appendix B, Menu definitions.
To sync channels on the display (simultaneously display channel name and frequency),
follow these steps:
Procedure 9.3. Synching the Display
1. Press the
key to enter the menu
MENU
2. Enter
on your numeric keypad to come to the Sync Menu
Visit Radioddity.com For Downloads And Help
41
3. Press
key to select
MENU
4. Use the
and
5. Press
to confirm and save
MENU
6. Press
to exit the menu
EXIT
Use in Conjunction with Menus 21 & 22 to coordinate what is displayed-Appendix B Menu
Definitions
The power-on message can only be set via computer link, see the section called "Comput-
er Programming "for details on how to setup a link with your computer.
The following instructions assume that you've already established a link using the Baofeng
software from a computer running Windows, and that the Baofeng software is already
installed and running.
keys to select 'ON'.
Power-on message
42
Advertisement
Table of Contents
