14. Menu Guide – [Setup] Menu
[Monitor Backlight]/[LVF Luminance]
[AUTO]/[j3] to [i3]
Adjusts monitor/viewfinder luminance.
[AUTO]: The brightness is adjusted automatically depending on how bright it is
around the camera.
•
Adjusts the monitor luminance when displaying the monitor, and the viewfinder
luminance when displaying the viewfinder.
•
When either [AUTO] is set, or the adjusted value is set to positive side, the usage
period will shorten.
•
When [Night Mode] is being used, [Monitor Backlight]/[LVF Luminance] are not
available.
[Eye Sensor]
[Sensitivity]
This will set the sensitivity of the eye sensor.
[LVF/Monitor Switch]
This will set the method for switching between the viewfinder and monitor.
•
If you press [LVF] to switch the display, the [LVF/Monitor Switch] setting will also
switch.
[Level Gauge Adjust.]
[Adjust.]
Hold the camera in a horizontal position, and press
will be adjusted.
[Level Gauge Value Reset]
Restores the default level gauge setting.
[HIGH]/[LOW]
[LVF/MON AUTO] (automatic
viewfinder/monitor switching)/[LVF]
(viewfinder)/[MON] (monitor)
587
or
. The level gauge