Table of Contents
Advertisement
7. Metering/Exposure/ISO Sensitivity – Manual Exposure Mode
Manual Exposure Assist
When ISO sensitivity is set to other than [AUTO], Manual Exposure Assist
(example:
You can check the difference between the current exposure value and the
standard exposure (n0) measured by the camera.
•
Use Manual Exposure Assist as a guide.
We recommend checking the images on the playback screen when recording.
[B] (Bulb)
If you set the shutter speed to [B] (Bulb), the shutter stays open while the
shutter button is pressed fully. (up to approx. 30 minutes)
The shutter closes when the shutter button is released.
Use this when you want to keep the shutter open for a long time to record
images of fireworks, night scenery or a starry sky.
•
We recommend using a tripod or the Shutter Remote Control (DMW-RS2:
optional) during bulb recording.
•
Bulb recording may create noticeable noise.
If you are concerned about noise, we recommend that you set [Long Exposure
NR]
([Long Exposure NR]:
before recording.
•
Bulb is not available when using the following functions:
– [6K/4K PHOTO]/[Post-Focus]
– [Time Lapse Shot]
– [Stop Motion Animation] (when set to [Auto Shooting])
– [Bracketing]
) will be displayed on the recording screen.
519) to [ON] in the [Photo] ([Image Quality]) menu
266
Advertisement
Table of Contents
