Table of Contents
Advertisement
6. Drive/Shutter/Image Stabilizer – Recording with Time Lapse Shot
•
Pictures recorded to more than one card cannot be combined into a single video.
•
The camera gives priority to achieving the standard exposure, so it may not take
pictures at the set interval or take the set number of pictures.
Furthermore, it may not end at the end time displayed on the screen.
•
Time Lapse Shot is paused in the following cases.
– When the charge on the battery runs out
– When you set the camera on/off switch to [OFF]
You can set the camera on/off switch to [OFF] and replace the battery or card.
Set the camera on/off switch to [ON] and then press the shutter button fully to
resume recording.
(Note that the images recorded after replacing the card will be saved as a
separate set of group images.)
•
[Exposure Leveling] is not available if ISO sensitivity is set to other than [AUTO]
in [M] mode.
•
[Time Lapse Shot] is not available when using the following functions:
– [Multiple Exposure]
220
Advertisement
Table of Contents
