Table of Contents
Advertisement
9. Flash – Recording Using a Wireless Flash
Setting Items ([Wireless Setup])
•
To fire a test flash, press [DISP.].
[External
*1
Flash]
[Firing Mode]
[Flash Adjust.]
[Manual Flash
Adjust.]
[TTL]: The camera automatically sets the
flash output.
*2
[AUTO]
: Sets the flash output on the
external flash side.
[MANUAL]: Sets the flash output of the
external flash manually.
[OFF]: The external flash outputs only
communication light.
Adjusts the flash output of the external flash
manually when [Firing Mode] is set to [TTL].
Sets the flash output of the external flash
when [Firing Mode] is set to [MANUAL].
•
It can be set within the range of [1/1] (full
flash output) to [1/128] in 1/3 steps.
321
Advertisement
Table of Contents
