Table of Contents
Advertisement
10. Recording Videos – Recording Videos
•
If an operation such as a zoom or button operation is performed during video
recording, that operation sound may be recorded.
•
The lens operation sound (AF and image stabilizer) may be recorded to video.
•
If the operation sound of pressing the video rec. button or sub video rec. button to
end recording bothers you, try the following:
– Record the video about 3 seconds longer, and then divide the last part of the
video using [Video Divide] in the [Playback] ([Edit Image]) menu.
– Use the Shutter Remote Control (DMW-RS2: optional) for recording.
•
Depending on the type of card, the card access indication may appear for a while
after video recording. This is not a malfunction.
•
Even when playback is performed on a supported device, situations may occur
where image or sound quality is poor, recording information is not displayed
correctly, or playback is not possible, for example.
If you experience any of these, play them back on the camera.
•
If the camera temperature rises, [
Wait until the camera cools down.
•
Video recording is not possible while you are using the following functions:
– [Time Lapse Shot]
– [Stop Motion Animation]
– [Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/[Sunshine]
([Filter Settings])
– [Post-Focus]
•
You can switch the recording screen display to suit video recording just as with
the [
] mode:
[
]
[
•
You can display a red frame on the recording screen that indicates that video is
being recorded:
[
]
[
578)
]
[Video-Priority Display]
]
[Red REC Frame Indicator]
] may be displayed and recording may stop.
([Video-Priority Display]:
([Red REC Frame Indicator]:
329
577)
Advertisement
Table of Contents
