Menu Setup - Toshiba RAS-35S4KVDG-ND Owner's Manual

MENU SETUP

9
For select more setting of Air conditioner such as Direct/Indirect, Hi POWER,
OFF Timer and other use MENU button
9.1 DIRECT AND INDIRECT OPERATION
Thermal sensors detect the human inside the room to fi nding the position of
human and determine the louver operation to the airfl ow direction that user
.
require.
(except in DRY and FAN ONLY mode)
Direct
When the thermal sensor detects the human position
The air conditioner adjusts the louver to direct the air flow towards the human.
Indirect
When the thermal sensor detects the human position
The air conditioner adjusts the louver to indirect the airflow of the human.
Direct/Indirect operation setting
1. Press MENU button for enter menu selection.
2. Enter Direct/Indirect set by press MENU button.
3. Select Direct/Indirect operation by press TEMP. button.
4. Confirm selected feature by press MENU button again.
When feature had selected will return to menu selection display triangle mark
will blink
5. Leave from menu setting display by press EXIT button.
Note:
● Do not move the thermal sensor manually by hands or others. This may
Constrains at the following condition cannot be detected
● Person be along the wall.
● Person be directly under the air conditioner.
● Where any obstacle such as furniture, other heat source.
● Place that room temperature is too high.
● A person wears heavy clothes and his/her skin is not exposed.
● A heating element of which temperature changes significantly is present.
● Some heat sources, such as a small child or pet may not be detected.
● A heat source is too far from air conditioner.
● A heat source does not move for a long time.
● Detection may mistakes from other heat sources, sunlight, fireplace,
4
triangle mark will stop blink and setting feature will be blink instead.
Direct Indirect None
.
cause malfunction of the thermal sensor.
radiator, moving curtains, etc.
Blink both triangle and
feature mark Feature
not yet set.
Blink only feature
Blink only triangle
Feature already set.
EN