Adjustments - Atag 41-310-12 Operating Instructions Manual

Adjustments

only applies to the central heating and is independent of the hot water facility.
14
The boiler has a large number of settings options.
We advise you to contact your installer for
adjusting the boiler to your required settings.
Adjusting the flow water temperature (CH)
- Press the Mode key briefly
(from the Technical reading).
The display will show PARA .
- Press the Step key once.
The display will show 1 85 .
- Press the + or the - key to alter the adjustments,
if necessary.
- Press the Store key to confirm the setting.
The display will flash once.
- Press the Mode key briefly.
The display will show StbY for a short while and
will return to the Technical reading.
The flow water temperature that has been adjusted