Table of Contents
Advertisement
Quick Links
APPLICATION GUIDE FOR:
ENGINE
TIMING KIT
18745
This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of
the product. Read all information before operating product.
This guide has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains necessary information to ensure its correct and safe use. By following the information contained in
this guide, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this guide are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this guide, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
BRITISH
MADE
Advertisement
Table of Contents
Related Manuals for Draper 18745
Summary of Contents for Draper 18745
- Page 1 By following the information contained in this guide, it will ensure both product and operator safety, together with longer life of the product itself. AlI photographs and drawings in this guide are supplied by Draper Tools to help illustrate the operation of the product.
-
Page 2: Introduction
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
CONTENTS 1. TITLE PAGE 1.1 INTRODUCTION......................2 1.2 REVISION HISTORY ....................2 1.3 UNDERSTANDING THIS GUIDE................. 2 1.4 COPYRIGHT NOTICE ....................2 2. CONTENTS 2.1 CONTENTS ........................3 3. GUARANTEE 3.1 GUARANTEE ....................... 4 4. GENERAL PRODUCT INFORMATION 4.1 GENERAL PRODUCT INFORMATION ............... 5 HEALTH AND SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS FOR USE Personal safety...................... -
Page 4: Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period. -
Page 5: General Product Information
This product is designed to be used correctly and with care for the purpose for which it is intended. No liability is accepted by Draper Tools Limited for incorrect use or application of any of our products, and Draper Tools Limited cannot be held responsible for any damage to personnel, property or equipment when using this product. -
Page 6: Health And Safety Information
Warning: Please read all safety warnings and all details carefully. Failure to follow the warnings may result in serious injury or major component damage. Important: Draper Tools recommends that this product should not be modified or used for any application other than that for which it was designed. -
Page 7: Parts Drawing And Listing
CONTENTS ITEM DESCRIPTION STOCK No. Crankshaft MOT 1489 34226 Timing Pin Tensioner MOT 1135-01 34299 Adjusting Tool Pre-Tensioner Tool MOT1501 34498 - 7 -... -
Page 8: Application
APPLICATION The 18745 has been developed as an engine timing kit for the vehicles listed below. This kit includes the belt pre-tensioner lever required on engines equipped with a manual tensioner. Used on the following Vehicles: Renault Kangoo 2010 - 2013... -
Page 9: Preparation
The following is for guidance only. Please refer to OEM derived data such as the vehicle manufacturer’s own data or Autodata. The use of this product is purely down to the user’s discretion and Draper Tools Limited cannot be held responsible for any damage caused what so ever. -
Page 10: Procedure And Application Guide
PROCEDURE AND APPLICATION GUIDE Depending on manufacture and model, some engine components do change. Please check with Autodata or the manufacturer’s data before use. Crankshaft Locking PIN (1) Align the crankshaft timing mark just before the 6 o’clock position and fit timing pin as shown. Turn the crank till it stops against the pin. -
Page 11: Explanation Of Symbols
10. EXPLANATION OF SYMBOLS 10.1 EXPLANATION OF SYMBOLS Read the guide. Refer to website. - 11 -... - Page 12 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the 18745 and is the answer not in the manual?
Questions and answers