Disconnecting The Lan Cable - Toshiba NB205-N313 User Manual

1. Turn off the power to the computer and to all external devices
connected to the computer.
2. Plug one end of the cable into the LAN jack. Press gently until you hear
the latch click into place.
1. LAN jack
3. Plug the other end of the cable into a LAN hub connector or router.
Check with your LAN administrator and hardware or software vendor
before using or configuring a network connection.
When the computer is exchanging data with the LAN, the LAN Active
indicator glows amber. When the computer is connected to a LAN properly
and is available to exchange data, the Link indicator glows green.

Disconnecting the LAN cable

To disconnect the LAN cable, follow the steps as detailed below:
Make sure the LAN Active indicator (amber LED) is out before you
disconnect the computer from the LAN.
1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub or router in the same manner.
Check with your LAN administrator and hardware or software vendor
before disconnecting from the hub.
User's Manual
2
2. LAN cable
Connecting the LAN cable
Operating Basics
1
4-15