Removing A Memory Module - Toshiba NB205-N313 User Manual

■
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer or keyboard. Foreign metal objects can create a
short circuit, which can cause computer damage and fire, possibly
resulting in serious injury.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
5. Seat the memory module cover in place and secure it with one screw.
Take care to ensure that the memory module cover is firmly closed.
1. memory module cover
6. Install the battery pack - refer to
Chapter 6,
7. Turn your computer over.
8. Turn the computer on and make sure the added memory is recognized -
to confirm this select Start

Removing a memory module

To remove the memory module, follow the steps as detailed below:
1. Turn the computer off and remove all cables connected to the computer.
2. Turn the computer upside down and remove the battery pack (refer to
Chapter 6,
3. Remove one screw securing the memory module cover.
User's Manual
Seating the memory module cover
Power and Power-up
System icon.
Power and Power-up
2. screw
Replacing the battery pack
Modes, if required.
Control Panel System and Security
Modes.)
Optional Devices
1
2
section in
8-6