Additional Memory Module - Toshiba NB205-N313 User Manual

Card Type
SD
SDHC
Memory media format
New media cards are formatted according to specific standards. If you wish
to reformat a media card, be sure to do so with a device that uses media
cards.
Formatting an SD/SDHC memory card
SD/SDHC memory cards are sold already formatted in conformity to
specific standards. If you format the SD/SDHC memory card again, be sure
to format it with the TOSHIBA SD Memory Card Format utility, not with the
format command provided by Windows.
In order to run the TOSHIBA SD Memory Card Format utility, click Start
All Programs
The TOSHIBA SD Memory Card Format utility does not format the
protected area of the SD/SDHC memory card - if you need to format all
areas of the memory card, including the protected area, you will need to
obtain an appropriate application that applies the copy protection system.

Additional memory module

You can replace the built-in memory with additional memory in order to
to increase the amount of system memory that is available.
This section describes how to install and remove optional memory
modules.
■
You should place a mat beneath the computer in order to prevent the
computer's lid from becoming scratched or damaged when you are
installing/replacing the memory module. In this instance you should
avoid mats that are made of materials that hold or generate static
electricity.
■
When installing or removing a memory module, you must ensure that
you do not touch any other internal areas of the computer.
User's Manual
Capacities
8MB, 16MB, 32MB, 64MB, 128MB, 256MB,
512MB, 1GB, 2GB
4GB, 8GB, 16GB
TOSHIBA Utilities
Optional Devices
SD Memory Card Format.
8-3