Advertisement
5. Auto Sensor Cooking
NOTE: Make sure that the outer panel Is installed before Auto Sensor
the outer panel.
OPERATION
Pour 150 + 15cc (4.5 + 1/2 ozs) of
toom temperature water in a beaker,
securely cover the top of the beaker
with plastic wrap and place the
beaker in the center of the oven.
Tap Auto Sensor Control, Cook Pad
5 times.
Tap Start Pad.
The humidity sensor detects steam
about 2 to 4.minutes after the Start
Pad is tapped.
Auto Sensor Cooking (T1) automati-
cally switches to time cooking (T2).
"A5" disappeares with beep sounds
and the remainder of cooking time
appears in display window.
NOTE: Cooking time will vary de-
pending on the water temper-
ature, the shape of beaker or
the power source voltage.
* Clock time disappears.
« "A5" appears in display window.
¢ Auto Sensor Cook indicator lights turn on.
¢ Auto Sensor Cook indicator light starts to blink.
* Oven lamp turns on.
¢ Fan motor and tumtable start rotating.
* Oven lamp will dim a little, about 50 seconds after Start Pad is
tapped. This indicates that magnetron has started oscillation.
* Auto Sensor Cooking automatically switches to time cooking.
+ "A5" disappears, two beeps sound, and 1 00 to 3 00 (1 minute
to 3 minutes) appears in the display window as balance of
cooking time.
« When the balance of cooking time has elapsed, oven stops and
beeps five times.
* Auto Sensor Cook indicator light and oven tamp tum off.
* TOD reappears in the display window.
* Finally check to make sure if TOD is correct.
NE-9970, NE-9970C
NE-9870, NE-9870C
Cooking Test, since Auto Sensor function does not operate properly without
FUNCTION
DISPLAY
150 + 1800
(4.5 + 1/2 ozs)
ROOM TEMPERATURE WATER
Advertisement
