Advertisement
—el1—
After Oven Starts:
> NO COOKING ACTIVITY BEGINS. Turntable does not rotate. Oven tight does not turn on. Only the time displayed
Starts to count down.
.
» WHEN PROGRAMMED TIME HAS ELAPSED, oven beeps five times. Time of day appears in display window.
Note: If oven door is opened during the timer function, the time in the display window will continue to count down.
Replacement of Oven Light
When it becomes necessary to replace the oven light,
i
2
you can replace it yourself. Please follow the directions
Stand Time
>
Ponaeaea:
Step 1
Step 1. Turn off the oven and unplug it.
;
2S
7
Step 2. Remove the screw from the oven light cover
Program desired cooking program
Dechea
> Selected program and indicator light
which is located on the top of the cabinet.
according to directions already
eon
appear in display window.
Step 3. Replace the oven light with only 115-125 V,
given in this manual.
Progiay
'
20 W, bulb. If this bulb is not available locally,
:
contact the nearest authorized MESCO
é
Servicenter.
Step 2
Step 4. Replace the oven light cover.
Touch Stand/Timer Pad.
> Previously selected Program and
indicator lights disappear.
Step 3
Set desired amount of time by
pressing Time Pads.
» Stand time appears in display
window.
(A maximum of 99 minutes and
99 seconds may be programmed
twice.)
Touch Start Pad.
After Oven Starts:
» DESIRED COOKING PROGRAM ACTIVITY BEGINS. Turntable rotates. Oven light turns on. Selected program
appears in disptay window and indicator light blinks.
WHEN is completed, turntable stops, oven beeps twice, and stand time counts down. Oven light turns on.
® AT END OF STAND TIME, oven beeps five times and shouts off..
Time of day appears in display window.
Note: !f oven door is opened during the stand time, the time in the display window will continue to count down.
Stand time cannot be programmed after Broil category is set.
00286-4N
'0/86-4N
90266-4N
'0266-4N
Advertisement
